The Xinzhuang (LNB) brand anaerobic incubator developed by Shanghai Xinzhuang Instrument Co., Ltd. is mainly used to provide a strict anaerobic environment for anaerobic bacteria. It is also called anaerobic glove box. One of the best instruments for oxygen bacteria. The anaerobic incubator is a large, sealed metal box with a transparent glass plexiglass front panel and two gloves on the board that can be manipulated inside the box with gloves. There is an exchange room on the side of the box, which has two inner and outer doors, and the inner door is closed inside the box. To put the object into the box, first open the outer door, put it into the exchange room, close the outer door for pumping and ventilation (H2, CO2, N2) to reach the anaerobic state, then hand into the glove to open the exchange room door, and put the item Move into the box and close the inner door. The anaerobic state is maintained in the tank, which is also the principle of utilizing the hydrogen in the aeration to oxidize the water under the catalysis of palladium and in the tank. The box is temperature-adjustable and has a gas-filled heated incubator that holds up to 425 plates. Stable control of 35 ° C and ambient temperature +4 to -70 ° C. It can be placed in a dissecting microscope to facilitate observation of anaerobic colonies. This system is suitable for large-scale culture studies of anaerobic bacteria, and a large amount of medium can be placed for pre-reduction and anaerobic sterility tests. The metal hard wall type anaerobic tank is automatically adjusted for pumping, aeration, anaerobic environment and temperature. It has a complete over-temperature alarm device and control system. Main technical indicators: Incubator temperature range: 4°C to 70°C above ambient temperature Internal material: Stainless steel chamber size (mm): 250×190×290, operating room size (mm): 800×650×660, external dimensions (mm): 1260 × 730 × 1380 Application: Widely used in the inoculation, culture, detection and subculture of anaerobic microorganisms. Precautions: 1. Install the instrument as far as possible in a place where the air is clean and the temperature changes little. 2. Before starting the machine, you should be familiar with and understand the instructions for using the various instruments and instruments, and master the correct use method. The input must be placed in the operating room to reach an absolute anaerobic environment; 4. In the event of a malfunction (such as gas shutoff), the operating room can still maintain an anaerobic state for 12 hours (more than 12 hours, the culture should be taken out as needed. 5. Always pay attention to the airway leakage; 6. When changing the cylinder, pay attention to tighten the air pipe to avoid the flow of oxygen-containing gas; 7. Use the vacuum pump as required, and check the refueling regularly. Shanghai Xinzhuang Instrument Co., Ltd. specializes in the production and sales of anaerobic incubator series products. The company has a good market reputation, professional sales and technical service team, and changes the information about anaerobic incubators with years of experience in operating anaerobic incubator series. Please contact Shanghai Xinzhuang Instrument Co., Ltd. for details!
Changxing Mingwang Rubber & Plastic Technologies Co.,Ltd. , https://www.cxmingwang.com