1. The operator must strictly abide by the safety principles of your factory.
2. This machine needs to be designated by a dedicated person to operate. The operator can start operation after passing the training and fully learning to understand the operating instructions and understanding the danger zone of each part of the machine.
3. Before starting the machine, check whether the handles, buttons, and safety shields are in the predetermined position. Note that other people around the machine should be in a safe location.
4. When the machine is running, it is not allowed to touch the cutting materials such as books. Only after the machine is shut down, the machine can be cleaned or the channel blockage can be eliminated.
5. After the machine debugging is completed, check that all tools or other objects have been removed from the machine, and then jog the machine slowly for a week to avoid accidents.
6. The knife guard must be used when changing or lowering the knife. After the operation, remove the knife guard.
7. All safety devices must be kept intact and effective, and the faulty parts should be repaired or replaced in time.
8. The length of the side knife connecting rod and the front knife connecting rod of the machine are adjusted before leaving the factory. The user should not adjust it by himself. If it is not adjusted properly, the machine will be damaged.
Ro Water Treatment Plant Ro,Ro Water Treatment Plants,Water Treatment Purification Plant,Small Water Treatment Plant
Zhangjiagang EBA Machinery and Equipment Co., Ltd , https://www.eba-machine.com