Talking about: Package imposition printing matters needing attention

1. One-page printing

Centering (vertical midline) splicing local 6mm hemorrhages at the time of imposition, ie 3mm bleed on each side of each single page (requires two cuts).

Explain: If you do not have bleeding pictures, shading, or full shading, you can press 1 to make a plan. The center can use one knife.

2, the imposition of the envelope

At the time of ordinary manufacturing, we used to spell the envelope together with the "tongue". This practice was similar to the cost of paper (there was no application for a blank space), but the pattern was good.

There is also a way to cover the front cover, "the tongue" to do it alone, so as to save paper, but more than a "paste", that is, when the product is scraped a plastic (or a double-sided adhesive tape).

3, box imposition

Ordinary large packing box (more than 8K) does not have to make imposition, direct printing

The following brief introduction to the small package imposition.

As far as possible on the premise of combining, to make the imposition task to be the most compact, but the box after the road involved in more than the process, rolling box (cut the edge and press the crease line) is the most important, then need to pay attention to the imposition The distance between the two sidelines is not less than 3mm, otherwise it will be very time consuming in order to affect the product quality.

When you have completed the imposition (accepted by the customer's signature), it is best to produce a large-sized knife film to facilitate the printer's row knife.

4, prick card

The ally who can engage in typing and copying and doing hand thorns have such experience. One hand stabs 8 hand stabs on the paper and cuts it out with a cutter. In fact, doing so is very expensive, my experience is a hand stabbed paper can do 10 hand stabs, do not need to cut the card machine, if the number is small, you can use the ruler, knife, if the number is large, then borrow paper from the printing plant Machine, very convenient, and very economical. If you only do one or two boxes of hand thorns, just right and colorful, and you just have an envelope to do, then apply the blank space of the envelope.

5, tag cards and stickers, etc.

Very annoying instrument. But there is no difficulty, be careful and calculate the size. Divided into three categories:

(1) One knife (not bleeding), similar to a hand stab, requiring hemorrhage at the outermost edge;

(2) two cuts (including bleeding);

(3) Rolling box, drilling, rounding (requirements row knife version, spelling the same 2);

(4) Mixing spellings can be mixed in the open layout when the number of demands is proportional.

6, the following to the introduction of a beginner CD partner of a commonly used edge line drawing method, very applicable, originally should be sent to the vector section, but because of this and the posting is very related to it, made here.

(1) use hand-painted things, press the Ctrl key, the vertical line in the top left corner of the page vertical line (hair), and change the size of 3mm;

(2) Ctrl+A (aligned and scattered), D, T, L; [Note: The above version is Alt+A+A (method of opening the menu), the same below

(3) Change the x coordinate to 3, and tap the numeric keypad + number (rightmost of the keyboard) to copy a line;

(4) Change the x coordinate to 6 and group the two line segments;

(5) Press + again to copy and twist 90 degrees;

(6) discriminate the x, y axis coordinates by 3, a group of corners has been completed, and then this group of corners and press the + key to copy, and then degree mirror;

(7) Ctrl+A, D, R, no need to use T at this time, the graph is the degree of movement;

(8) Select two sets of corner lines, press + to duplicate, and mirror vertically;

(9) Ctrl+A, D, B, the corner line is completed;

(10) Finally, don't forget to add CMYK color book packs.