Introduction and design application of IC elevator card system

Briefly introduce the IC card elevator intelligent elevator management system: IC card elevator intelligent control management system is mainly installed in the elevator car or the IC card elevator reading head outside the car, the IC card elevator controller of the car top, installed in the management The IC card is issued by the center, the software, and the IC card held by the users of the elevator.

I. System introduction and main highlights

A card reader is arranged in the elevator car, and after the elevator user swipes the card, the elevator can open the car interior command for the pre-set floor of the IC card, and provide the user with the registration; if there is no card or the card is unauthorized, the floor is Can not register, you can choose the password keyboard to achieve the password to take the ladder, you can do the elevator and building intercom system linkage. Open public areas do not require an IC card to be registered. It is possible to restrict unrelated persons from entering the IC card permission area. A card reader is arranged outside the hall of the elevator. After the user of the smart IC card elevator swipes the card, the elevator can open the call button preset to the IC card and provide the user with registration; if there is no card or an unauthorized IC card, Cannot register, the open call button in the direction of the public area does not require a card to be registered. An elevator that restricts access to the IC card by an unrelated person. After the IC card issuance center sets the permissions for each IC card, the issued cards can be used. Different cards can be set with different permissions, corresponding to different users; the management IC card held by the administrator is usually set to Use the full authority of the elevator; basically can be divided into: owner card, reception card, advanced reception card, temporary card, property management card, etc. For lost cards, the IC card issuance center can report the loss, disable the lost IC card, and prevent the illegal holder from continuing to use it. The intelligent IC card control elevator management system automatically withdraws from the management when the elevator is in a special state such as fire protection, maintenance, etc., and can also exit the management through a manual switch. The card-type elevator can realize the registration without the IC card, and the elevator access control system is convenient to use under special circumstances.

The intelligent IC card control elevator management system strengthens the weak side of the management in the traditional safety management system, greatly improves the safety level of the building and gives the owner a noble enjoyment.

The role and contribution of the system to society:

1. Significantly improve the convenience and safety of the owner's residence, bring concentrated and simple and effective work to the property manager, and raise the real estate selling point for the real estate agent;

2. Energy saving.

Second, system function description and technical parameters

A, technical parameters

IC card elevator intelligent management system product model: DUOAO-DT-CK;

Elevator IC card box body size: L350*W350*110H;

Swipe elevator working voltage and current: use DC DC 24V ± 10% / 3A, the power supply has over current, over voltage, lightning protection, anti-static function;

The maximum working current of the main control board of the elevator card is <480mA;

The elevator access control current is about 120mA;

Elevator intelligent control layer: The main control board controls 16 layers, which can be expanded according to requirements;

Each contact is a passive dry contact input and output characteristic; one fire linkage input, 32 contact output;

On-resistance <3Ω;

The cutoff resistance is greater than >20MΩ;

Use environment: Temperature: -20--70 °C Relative humidity: 20% - 90% no condensation;

Storage environment: Temperature: -30--90 °C Relative humidity: 20% - 90% no condensation;

Use card: The system uses Mifare®1 card, the typical operation time is 0.2 seconds; the card capacity is not limited;

CPU card elevator intelligent management system, the typical operation time is 0.3 seconds;

T5557 card elevator intelligent management system, the typical operation time is 0.3 seconds;

And support (ID card elevator intelligent management system, EM card elevator intelligent management system, HID card elevator intelligent management system, legic card elevator intelligent management system);

Support biometric read head (fingerprint, non-contact vein recognition);

Support mobile phone brush elevator;

Communication interface: RS485/RS232, optional TCP/IP, can be run completely offline;

The intelligent elevator read head is divided into ordinary type and password type.

B, IC card elevator intelligent control system function brief

1. Intelligent elevator floor personnel control system, specially designed for the control personnel in the elevator school box to enter and exit a specific floor. Control cardholders to enter and exit certain floors that are allowed to enter and exit to prevent random access to all floors to ensure safety;

2. The system is connected with the elevator itself by passive contacts. The two are completely isolated and will not have any impact on the original performance of the elevator; full-port over-current, over-voltage, lightning protection, safe, stable and reliable;

3. With section type increase, delete, query card number and floor setting, you can set the control of the elevator such as the holiday time permission setting in different time periods;

4. With time zone control: realize that the system is open for a certain period of time, controlled within a certain period of time, so that the elevator can automatically run according to regulations;

5. Operation mode: Single-layer card (owner card) holders swipe directly. No need to press the button; multi-layer card (physical management card such as hygienic aunt, patrol security) after swiping the card, you must press the permission button recorded in the card to arrive; optional password keyboard to achieve the forgotten card (owner sooner or later) When walking, enter the password to take the elevator; including the advanced reception card function to solve the problem of frequent reception of the guests by the owners; for the visitors, temporary cards, ordinary reception cards, temporary reception cards can be used;

6. The product comes with self-test device. When the system fails or is damaged, it can send out the signal, it will automatically detach from the original system, restore the original state of the elevator, and not affect the use of the elevator;

7. With fire signal input interface, when the passive dry contact fire switch signal is activated, the IC card elevator system does not work, and the elevator returns to the original state;

8. The core adopts high performance, low power ARM chip (ARM core, which can quickly meet the customer's personalized function requirements) and uses low-power CMOS microcomputer, when the power is off, the personnel and stored data can be saved for 10 years without loss. Smart card for parking lot/access control/attendance/consumption/channel.

Third, the system consists of

1, IC card elevator controller

IC card elevator controller (using 32-bit ARM high-speed processor, processing data is fast and safe.)

Product model: DUOAO-DT

Appearance size: L350*W350*110H

Working voltage and current: use DC DC 24V ± 10% / 3A, power supply with over current, over voltage, lightning protection, anti-static function

Main control board maximum working current <480mA

Working current is about 120mA;

Elevator IC card control layer: The main control board controls 16 layers, which can be expanded according to requirements;

Each contact is a passive dry contact input and output characteristic; one fire linkage input, 32 contact output;

On-resistance <3Ω;

The cutoff resistance is greater than >20MΩ;

Use environment: Temperature: -20--70 °C Relative humidity: 20% - 90% no condensation;

Storage environment: Temperature: -30--90 °C Relative humidity: 20% - 90% no condensation;

Use card: The system uses Mifare®1 card, the typical operation time is 0.2 seconds; the card capacity does not limit the CPU card, the typical operation time is 0.3 seconds;

T5557 card, typical operating time is 0.3 seconds;

And support (ID card, EM card, HID card, legic card);

Support biometric read head (fingerprint, non-contact vein recognition);

The elevator intelligent control system supports mobile phone brush elevators;

Communication interface: RS485/RS232, optional TCP/IP, can be run completely offline;

The IC card elevator read head is divided into a common type and a password type.

2, IC card elevator card reader (divided into ordinary and password type)

Used in conjunction with the IC card elevator intelligent controller;

Use card: The system uses Mifare®1 card, the typical operation time is 0.2 seconds; the card capacity does not limit the CPU card, the typical operation time is 0.3 seconds;

T5557 card, typical operating time is 0.3 seconds;

And support (ID card, EM card, HID card, legic card);

Support biometric read head (fingerprint, non-contact vein recognition);

Support mobile phone brush elevator;

Support card password modification.

3. IC card elevator intelligent control system management center equipment:

IC card elevator card issuer technical parameters

A, elevator card reader product model: DUOAO-FKQ;

B, appearance size: L140*W100*30H;

C, power supply: external DC12V ± 5%;

D, power input power: 2W;

E, (Mifare® core module) model: MFRC500;

F, working environment temperature: -25 ° C ~ 45 ° C;

G, working environment relative humidity: ≤90% (no condensation);

H, the card type of operation is Miare®1 card;

I, read and write card distance: 0 ~ 50CM;

J, reader and host communication mode: standard RS-232 asynchronous serial communication;

K, communication parameters: baud rate: 115200bps; communication format: 1 start bit; 8 data bits; 1 stop bit; no parity; handshake mode: software handshake.

Fourth, the software profile

IC card intelligent elevator control system software main interface

For the operator who uses the system for the first time, almost all operation controls use shortcut keys. The system operator can directly click the corresponding shortcut button on the keyboard to perform corresponding operations. The quick start module of the system can quickly set all the parameters of the system. Detection, it is convenient for users to quickly set the parameters required for normal operation of the system, so that users can quickly grasp the use of the system.

Five, IC card elevator equipment installation method

The IC card elevator controller is safe for the car top, and the IC card elevator card reader is installed at the appropriate position of the COP panel of the car operating box. In order to facilitate the user to swipe the card and input the password, the card reader installation is generally installed in the car inner bottom to the operation panel. Between 1.2~1.4M.

98 Inch Conference Interactive Whiteboard

As a 98 inch conference all-in-one machine, 98 inch Conference Interactive Whiteboard, microphones and conference software. The small size contains great momentum, providing high-quality pictures and sound effects for team video conferences.
In terms of camera hardware configuration, the 98 inch electronic Interactive Digital Board uses a 12 million pixel camera and supports a wide viewing angle of 120 degree. It can be used in small and medium-sized office spaces and can incorporate more team members into the video conference scene. 4K high-definition resolution can provide high-quality video images, adding points to the corporate image.
In terms of sound experience, 98 inch interactive digital board has built-in 6 array microphones to bring high-fidelity sound quality, and 98 inch conference interactive smart board can achieve up to 8 meters of remote sound pickup, and can perform accurate sound in every corner of the meeting room. At the same time, in the remote meeting mode, the tablet will locate the sound source so that the speaker will not be able to display the picture, automatically gain the voice, eliminate echo and noise, even if the speaker is far away, the audience can still hear it.

98 Inch Conference Interactive Smart Board,98 Inch Conference All-In-One Machine,98 Inch Electronic Interactive Digital Board,98 Inch Interactive Digital Board

Guangdong Zecheng Intelligent Technology Co., Ltd , https://www.zecheng.com