Woodworking saw blade operation technology

Operating technology

The joinery band saw machine is generally operated by hand. Two people should be equipped when sawing large workpieces. When performing straight-line sawing, the workpiece is stabilized by the upper hand, and the saw ratio is pushed forward to advance horizontally. The long material can be slightly extended by the operator so that the rear end of the workpiece is not lower than the table top. The feed rate should be properly controlled according to the nature of the material and the size of the workpiece. It is forbidden to push and pull the saw blade. When the workman has sawed 200mm back, the hand can be pulled. When the back end of the workpiece is close to the sawtooth 200 mm, the upper hand should be disengaged, and the workpiece is sawed by the lower object. Do not feed the workpiece when the saw blade does not reach the maximum speed after driving, so as not to suddenly increase the motor load.

If a clip saw occurs during work, the workpiece kerf should be separated by force on both sides. Do not reverse it to prevent the saw blade from falling. There are situations such as running saws and purlins (swings before and after the saw blade), that is, parking should be carried out, and saw blades, saws (roads), saw cards, sawing wheels, etc. should be inspected. After the saw blades are in normal operation, sawing is performed. When the work surface saw blade is blocked by broken wood debris, use a wooden stick to disengage it. Do not finger it. In order to prevent the resin sawdust from sticking on the saw blade and the saw wheel surface, and increasing the friction and resistance between the saw blade and the saw wheel, kerosene scrubbing can be used in the work.

CONTUO Electric Height Adjustable Desk includes five different series: Single Motor Sit Stand Desk, One Leg Sit Stand Desk, Two Legs Sit Stand Desk, Three Legs Sit Stand Desk, Four Legs Sit Stand Desk. CTT-D02 is our single motor sit stand desk, while CTT-01-C3 is a one leg Height Adjustable Desk with moving wheels. CTT-F01 (one leg sit-Standing Desk) can be used for business negotiations or as a dining table. CTT-L03 (3-legged sit stand office desk) is an L-shaped solution for managers and for some special office ambience settings. CTT-I03 is a sturdy meeting table that is also adjustable in height. CTT-BKB (face-to-face height Adjustable Desk) is an office workstation for two persons. We focus on sit stand desk for many years, and that's why we are becoming the leading manufacturer in this field.

CTT-02-C2/C3/R2/R3 control system is our patented and proprietary program for CONTUO sit stand desks, which has been duplicated by other factories. CTT-F02-C3/R3 electric height adjustable desk with 3-stage square lifting columns, is a new development of CONTUO sit stand desk with supreme stability and loading capacity. CTT-02-C3/R3 dual motors height adjustable desk, is the most selling sit stand desk with the highest price value. The patented sit-standing desk, CTT-01-C3B, is another outstanding product of CONTUO in that it agglomerates all the efforts of CONTUO engineers and presents the high-technology and innovation of CONTUO. In order to meet different demands from different customers, we have the economic series of sit-standing desk, that is CTT-D02 single motor height adjustable desk. Compared with CTT-02-C3 series, CTT-D02 series is less expensive and therefore more affordable. Every customer coming here can find the suitable sit stand desk to their needs. 

Electric Height Adjustable Desk

Electric Height Adjustable Desk,Adjustable Height Desk,Electric Desk,Adjustable Office Desk

Shaoxing contuo Transmission Technology Co.,Ltd , https://www.electricdesk.nl