Multi-layer board is one of the commonly used materials for furniture processing enterprises, and it is a kind of wood-based board. A set of veneers is usually formed by gluing a vertical stack of adjacent layers in the direction of wood grain. The multi-layer board is usually symmetrically disposed on the center layer or both sides of the core. The slabs which are formed by laminating the veneered veneers in the direction of the wood grain are pressed under heating or no heating. The number of layers is generally odd, and a few have even numbers. The difference in physical and mechanical properties between the vertical and horizontal directions is small. Commonly used are multi-layer boards such as plywood and plywood. Multi-layer boards can improve wood utilization and are a major way to save wood. It can also be used for aircraft, ships, trains, automobiles, construction and packaging boxes.
Multi-layer boards, also known as three-ply boards and plywoods, have different layers. According to the thickness of 3-9 cm, it can also be called 3-9 PCT. Its advantages and disadvantages mainly depends on raw materials. The price of each piece of 1.2m??.4m of Liu Anxin is 10-20 yuan. The peach core and poplar are cheaper.
The main use in the home decoration is the veneer plywood, which has already attached a very thin solid wood veneer to the three plywood in the factory. The veneer plywood is easy to use and the price is cheaper than buying a veneer for the construction team.
The length and width specifications of the multi-layer board are the same as the length and width specifications of the building formwork, which are basically: 1220×2440mm, and the thickness specifications are generally: 3, 5, 9, 12, 15, 18mm, etc. The main tree species are: hawthorn, willow, poplar, elm and so on.
The multilayer board has good structural strength and good stability. It has the advantages of light material, high strength, good elasticity and toughness, impact resistance and vibration, easy processing and finishing, insulation, etc. The plywood has a large amount of glue, and it should be finished with edge sealing during construction to reduce pollution.
Fully Automatic Screen Printing Machine designed for printing round pens, syringes, round cosmetics, small diameter cylinders or similar cylinders; with automatic feeding, blanking and counting functions; with drying function, hot air and UV Kinds, customers can customize according to the situation; printing speed is fast and printing speed is adjustable, printing effect is good, easy to operate and adjust.
Automatic Pen-rod Screen Printing Machine
Pen Screen Printing Machine,Automatic Pen Screen Printer,Automatic Pen Printing Machine,Automatic Pen Screen Printing Machine
KC Printing Machine (Group) Limited , http://www.kcautopm.com