Developed by Peking University Founder, Wenhe Folding Software serves users with an all-Chinese operating platform, providing users with an intuitive, simple, and easy-to-learn interface. The text-combination template files can be generated at one time, and can be called repeatedly and flexibly, and can be transplanted. No matter how complicated the operation is, the content can be completed in an accurate and efficient manner at the speed of quality and quantity, replacing the traditional manual imposition. The pattern, this platemaking process completes a leap to the digital age.
Here are some tips and methods for the application of the textual and manual software.
First, the template parameter settings Small page size, distance between pages, bleeding size (cut out), side empty size, large page size.
a. The page size is actually the finished product size of the final printed product we have printed;
b. The distance between pages is the distance between the small pages and the small pages in the imposition process. The milling back position needed in printing is here.
c. Bleeding size, which is what we usually say, is a page in which the printed product has some full-bottom nets or full-size images during the printing process. In order to avoid the error caused by cutting, the white edge effect is caused by the increased size. , Usually 3m m or 4m m ; The size of the edge is to leave a certain space around the completion of the small page imposition, used for cutting tangent lines, rules line, bite mouth and layout description text;
d. Large page size is the sum of all the above parameters.
2. Logical page position.
The logical page code is simply the folding sequence code. Assuming a 16-page print is a print, the number of pages on the print is 16 pages. The position of the page number in the imposition is the required logical page position in the template parameters. The other logical page positions of this print are analogy. Assuming that a 16-print product is 2 sheets, the actual page number of the 2nd sheet is 17-32, but its logical page number is still the same as the 1st sheet. This is the logical meaning. Understanding the logical page number is good, and it will be very helpful for using the software.
3. Page orientation, folding, cropping, and registration mark of the page.
Set according to the requirements of the printed folding. That is to say, before preparing to make a copy-and-conquer template, you must have sufficient information about the follow-up printing, folding, nailing, cutting, and other processes on the imposition requirements, and set up each step according to the data requirements. In addition to this, it is necessary to set rules, folding lines, bite marks, captions, etc. so that they can meet actual needs. In addition, Wenhe Software also has special settings for user-defined peripheral labels, such as folding labels, subscript labels, factory labels, color labels, etc., but the positioning requirements cannot be well achieved in applications. It needs to be further solved.
Second, the specification of a folding job You can use multiple pages of a multi-page PS file to make a fold. You can call a single page of a multi-page PS when you make a folded job. At the same time, it allows you to make more than one page. Each of the PS, EPS, S2, S72, and PS2 files is composed of an arbitrary number of blank pages inserted between the files constituting the job and the number of blank pages designated at a time. PS files (Printer files and International Postscript files) and TIFF files that are normally generated before the output can be combined to produce large-format output films, which is very convenient for your outstanding output tasks. Fast solution.
Several issues to pay attention to in the folding operation:
1. The print output file is consistent with the size of the folded template file. Such as the PC's Founder Feiteng software, the page size, cut size settings should in principle be consistent with the small page size, cut size in the fold template file, in order to ensure that the output of the film is not aliasing.
2. The required size of the picture (TIFF) file is consistent with the sum of the small page size and the cut size in the fold fit template file. If the sizes are inconsistent, the position of the picture on the page may be irregular. If the image size is too large or too small, it will be centered on the center of the small page in the folding operation, and the small pages and cuts will be cut off.
3. The PS Make file generated by the Pagemake file is basically the same as that of the Feiteng file. However, during production, the layout requires that the page size be set to the finished product size. When the PS file is generated for printing, the print size should be set to the finished product size (which is also the small page size in the text-combination template file) plus the double-cut (Cutting) The size must be the same size as the size of the cut in the text-combination template file, and the two sides are the sizes of the two cuts), and the page must be selected and processed separately when generating the PS file.
4. The PS file produced by CORELDRAW printing is basically the same as the requirement of the TIFF file, so it will not be repeated here.
The requirements for the PS5 (or PS2) file generated by the Founder Edition and the Wyse are basically the same as the above. Only the PS2 file generated by the earlier version of the book, since it is only the heart-sized file, the page must be added when selecting the page. Blank space to achieve the finished product specifications.
Third, binding and template selection
One of the items in the Coupling Work is the selection of the corresponding binding method and the discount template. The selection of the binding mode should be set according to the printing binding requirements. If there is no available binding mode, you can choose to customize one, which is a more flexible binding mode, and then rearranges the folding operations according to actual needs. The location and direction of the logical page number. However, the selection of a hand-backed template must require a corresponding hand-off template corresponding to the parameters of the job, so as to ensure that the final purpose of the imposition is correct. In addition, Fang Wenjianhe Software also provides a variety of hand-back methods for the binding of printed materials. Some special requirements such as binding books, such as the joint operation of folding hands, the basic approach is basically the same, the user can select the target of folding.
Fourth, the provisions of the page number in the PS document. Coupling work for the number of pages of the PS file is strictly required.
1. The number of pages set in the Collaborative Handoff Job must be strictly consistent with the number of pages of the PS file (or other) added. If there is any inconsistency, an error will be generated when the folding job completes the output, and the correct large version file cannot be generated normally.
2. If the page number of the desired PS file is insufficient, add an empty page to complete the page number.
3. The addition of the page-page order must be accurate. The meaning of the logical page number has already been mentioned, that is, the order of the files required to be added must be consistent with the logical page number order, and the page number represented by the empty page must be added at the position of the corresponding page number. , this will not appear misspelled version of the problem.
V. Output Couplings Set a zoom factor to achieve vertical and horizontal zooming of the large version, which is convenient for users to proofread before outputting the film. When the output film is selected according to the size of the image-setter, page-unwrap or not, if the page-out output is selected, two output files will be automatically generated. One is the selected file name (suffix is ​​PS), and the other is the automatically generated one. After the file name is added "_T" (suffix PS) files, these two files is a large version of the two files split into two parts left and right, there are several printed sheets will have several pairs of such files, one by one that is can.
Combining hand and hand software is easy and fast to use, easy to use, and easy to learn. After mastering the above methods, the application of Arthur Co. can basically reach the level of convenience and convenience. The entire operation process is shown in Figure 1.
Generate template → Start to fold jobs → Generate hand-fold files → Output Figure 1 Text-to-sew software workflow (omitted)
The emergence of software and manual folding software has made the traditional manual imposition work completely replaced by an efficient and accurate automated folding platform. Eliminating the error of manual imposition, overcoming the interference of human factors, saving staff, land and raw materials, and avoiding the occurrence of quality accidents and quality risks. Through the historical dust, we can see the road leading to the future, the benefits brought by digitalization are reflected, and the process-assisted design improves the imprinting rate.
Here are some tips and methods for the application of the textual and manual software.
First, the template parameter settings Small page size, distance between pages, bleeding size (cut out), side empty size, large page size.
a. The page size is actually the finished product size of the final printed product we have printed;
b. The distance between pages is the distance between the small pages and the small pages in the imposition process. The milling back position needed in printing is here.
c. Bleeding size, which is what we usually say, is a page in which the printed product has some full-bottom nets or full-size images during the printing process. In order to avoid the error caused by cutting, the white edge effect is caused by the increased size. , Usually 3m m or 4m m ; The size of the edge is to leave a certain space around the completion of the small page imposition, used for cutting tangent lines, rules line, bite mouth and layout description text;
d. Large page size is the sum of all the above parameters.
2. Logical page position.
The logical page code is simply the folding sequence code. Assuming a 16-page print is a print, the number of pages on the print is 16 pages. The position of the page number in the imposition is the required logical page position in the template parameters. The other logical page positions of this print are analogy. Assuming that a 16-print product is 2 sheets, the actual page number of the 2nd sheet is 17-32, but its logical page number is still the same as the 1st sheet. This is the logical meaning. Understanding the logical page number is good, and it will be very helpful for using the software.
3. Page orientation, folding, cropping, and registration mark of the page.
Set according to the requirements of the printed folding. That is to say, before preparing to make a copy-and-conquer template, you must have sufficient information about the follow-up printing, folding, nailing, cutting, and other processes on the imposition requirements, and set up each step according to the data requirements. In addition to this, it is necessary to set rules, folding lines, bite marks, captions, etc. so that they can meet actual needs. In addition, Wenhe Software also has special settings for user-defined peripheral labels, such as folding labels, subscript labels, factory labels, color labels, etc., but the positioning requirements cannot be well achieved in applications. It needs to be further solved.
Second, the specification of a folding job You can use multiple pages of a multi-page PS file to make a fold. You can call a single page of a multi-page PS when you make a folded job. At the same time, it allows you to make more than one page. Each of the PS, EPS, S2, S72, and PS2 files is composed of an arbitrary number of blank pages inserted between the files constituting the job and the number of blank pages designated at a time. PS files (Printer files and International Postscript files) and TIFF files that are normally generated before the output can be combined to produce large-format output films, which is very convenient for your outstanding output tasks. Fast solution.
Several issues to pay attention to in the folding operation:
1. The print output file is consistent with the size of the folded template file. Such as the PC's Founder Feiteng software, the page size, cut size settings should in principle be consistent with the small page size, cut size in the fold template file, in order to ensure that the output of the film is not aliasing.
2. The required size of the picture (TIFF) file is consistent with the sum of the small page size and the cut size in the fold fit template file. If the sizes are inconsistent, the position of the picture on the page may be irregular. If the image size is too large or too small, it will be centered on the center of the small page in the folding operation, and the small pages and cuts will be cut off.
3. The PS Make file generated by the Pagemake file is basically the same as that of the Feiteng file. However, during production, the layout requires that the page size be set to the finished product size. When the PS file is generated for printing, the print size should be set to the finished product size (which is also the small page size in the text-combination template file) plus the double-cut (Cutting) The size must be the same size as the size of the cut in the text-combination template file, and the two sides are the sizes of the two cuts), and the page must be selected and processed separately when generating the PS file.
4. The PS file produced by CORELDRAW printing is basically the same as the requirement of the TIFF file, so it will not be repeated here.
The requirements for the PS5 (or PS2) file generated by the Founder Edition and the Wyse are basically the same as the above. Only the PS2 file generated by the earlier version of the book, since it is only the heart-sized file, the page must be added when selecting the page. Blank space to achieve the finished product specifications.
Third, binding and template selection
One of the items in the Coupling Work is the selection of the corresponding binding method and the discount template. The selection of the binding mode should be set according to the printing binding requirements. If there is no available binding mode, you can choose to customize one, which is a more flexible binding mode, and then rearranges the folding operations according to actual needs. The location and direction of the logical page number. However, the selection of a hand-backed template must require a corresponding hand-off template corresponding to the parameters of the job, so as to ensure that the final purpose of the imposition is correct. In addition, Fang Wenjianhe Software also provides a variety of hand-back methods for the binding of printed materials. Some special requirements such as binding books, such as the joint operation of folding hands, the basic approach is basically the same, the user can select the target of folding.
Fourth, the provisions of the page number in the PS document. Coupling work for the number of pages of the PS file is strictly required.
1. The number of pages set in the Collaborative Handoff Job must be strictly consistent with the number of pages of the PS file (or other) added. If there is any inconsistency, an error will be generated when the folding job completes the output, and the correct large version file cannot be generated normally.
2. If the page number of the desired PS file is insufficient, add an empty page to complete the page number.
3. The addition of the page-page order must be accurate. The meaning of the logical page number has already been mentioned, that is, the order of the files required to be added must be consistent with the logical page number order, and the page number represented by the empty page must be added at the position of the corresponding page number. , this will not appear misspelled version of the problem.
V. Output Couplings Set a zoom factor to achieve vertical and horizontal zooming of the large version, which is convenient for users to proofread before outputting the film. When the output film is selected according to the size of the image-setter, page-unwrap or not, if the page-out output is selected, two output files will be automatically generated. One is the selected file name (suffix is ​​PS), and the other is the automatically generated one. After the file name is added "_T" (suffix PS) files, these two files is a large version of the two files split into two parts left and right, there are several printed sheets will have several pairs of such files, one by one that is can.
Combining hand and hand software is easy and fast to use, easy to use, and easy to learn. After mastering the above methods, the application of Arthur Co. can basically reach the level of convenience and convenience. The entire operation process is shown in Figure 1.
Generate template → Start to fold jobs → Generate hand-fold files → Output Figure 1 Text-to-sew software workflow (omitted)
The emergence of software and manual folding software has made the traditional manual imposition work completely replaced by an efficient and accurate automated folding platform. Eliminating the error of manual imposition, overcoming the interference of human factors, saving staff, land and raw materials, and avoiding the occurrence of quality accidents and quality risks. Through the historical dust, we can see the road leading to the future, the benefits brought by digitalization are reflected, and the process-assisted design improves the imprinting rate.
Fly Reel,Fly Rod,Fly Hook
Fly Fishing Rod,Rod Buildings Co., Ltd. , http://www.nsflyreel.com