About paper cutting process (3)

Lift Paper Stacker The Stack Lifter is used to raise the material to the height of the desk top, which is an ideal height for operator work. Here is a lift table that is also referred to as "fixed to the height of the cutter blade." It can be mounted on the left, right or left and right sides of the cutter.

Independent free-standing stop, removable stack lift paper machine, with a lifting capacity of up to 1000 kg. The lift is equipped with a platform, and an infrared grating barrier probe ensures that the material automatically lifts the material to the height of the tabletop. .

Advantages: The speed of loading or unloading paper on the paper cutter can be increased by 15-20% faster with the elevator lift station.

åž› Qi device paper machine:

Another requirement for precise cutting is that each reamed paper must be exactly aligned. Polar's é—¯ é—¯ é—¯ é—¯ é—¯ can accomplish this material preparation.

Importance of the cutting material preparation process In most cases, the printed material must be prepared before cutting, and it should be done in a workshop outside the machine. This can reduce the actual cutter cutter work time of the device.

What are the contents of material preparation?

Material preparation includes a number of processes, ie, paper-making, quality control, and quantity quantification.

This preparation can be done online or in another place. It depends on both application and time.

Quantification of paper quantity is also part of the preparation

It can be quantified by counting or weighing. For this purpose, the paper machine is mounted on a pound scale. Pounds say that the weight can be weighed out, and that a linked reference can calculate the weight of the paper placed on the pick-up table. Referring to the meeting scale, count the paper thickness on the desktop. Then the exact number of papers is displayed.

Conveyor conveyors connect the peripherals to the cutter cutter. They are designed in a modulatable system. They are designed in a modular system that can be adapted to specific dimensional requirements. Pneumatic conveyors create an air cushion beneath the material, making the material easier to transport.

The buffer stacker means that if both the stacker and the cutter are not synchronized in time, they must wait, and therefore the buffer stacker must be buffered. The Qi Qi process should be carried out separately from the cutting process, so that the material of the Qi Qi needs to be temporarily stored in a certain place and sent out later. Polar has solved this problem with a pneumatic plate system.

The pneumatic plate system is next to the cutter cutter and it accepts a paper stack. It is a supply station for a cutter cutter, and its top is raised to the exact height of the cutter table at the cutter cutter. Below the air supply, an air cushion is formed, which makes it very easy to transport the material to the tabletop of the Cutter machine machine.

Transmat is an automatic system that makes loading and unloading easier and more efficient. There are two models:

Type B (Transmat B) is not used to load paper. Type E (Transmat E) - Used for unloading paper.

Transomat B, stacks the paper from stacks on the stack, and (without manual) feeds the cutter's tabletop at the rear of the machine to the back table of the cutter. The number of stacks of paper is accurately counted by the scale system of an integrated circuit. The number of stacks of paper is accurately counted by the Chip-Marker system.

advantage:

The operator can still perform continuous cutting operations while loading the paper loading process. There is no longer any need for manual lifting. The benzene body that carries the paper works hard.

Polar Transomat E automatically unloads the paper from the high-speed slitter after cutting. The paper is removed in batches or batches and placed on pallets automatically, without any human intervention and without any manual intervention. The edge of the pile of paper is still very neat, so that you can do the next step, but also directly packaged and shipped.

In addition, the paper machine can also use the Chip-Marker system to mark a certain number of counted papers, bring the identification card, and can be sent to the Hyundai Station where the prepared paper to be cut has been stacked. .

All of the above-mentioned peripherals are part of the polar cutter cutter system. Users can choose according to their needs.

Source: Longjiang Printing Network